Great Lakes Regional Pollution Prevention Roundtable
Promoting Pollution Prevention Through Information Exchange
   

GLRPPR Sector Resource: Calculating Emissions from FRP Sources

Title:
Calculating Emissions from FRP Sources

Abstract:
This portion of the Indiana Department of Environmental Management (IDEM) web site describes an emissions model that IDEM developed with the Composite Fabricators Association (CFA), called "CFA Unified Emission Factor Table for Open Molding." The model is used to calculate emissions for air permitting. These emission factors were initially created in April 1999. An addition to add gelcoat non-atomized application was made in July 2001. The CFA is now known as the American Composites Manufacturers Association (ACMA). Links to both the Unified Emissions Factors and the Gelcoat Non-atomized Applications Factors are available from this page.

URL:
http://www.in.gov/idem/5140.htm

Source:
Indiana Department of Environmental Management

Resource Type:
Software/electronic tool

Date of Publication:
Not Available

Associated Sectors:

GLRPPR is a member of the Pollution Prevention Resource Exchange, a national network of regional information centers: NEWMOA (Northeast), WRRC (Southeast), GLRPPR (Great Lakes), ZeroWasteNet (Southwest), P2RIC (Plains), Peaks to Prairies (Mountain), WSPPN (Pacific Southwest), PPRC (Northwest).

P2Rx

One East Hazelwood Drive; Champaign, IL; 61820; (800) 407-0261; glrppr@istc.illinois.edu